UP Metro LMRC Various Post Result (Lucknow Metro Job Result 2020 )

UP Metro LMRC Various Post Result

UP Metro LMRC Various Post Result. Uttar Pradesh Metro Rail Corporation Ltd.

Lucknow Metro has recently uploaded the result for the post of Assistant Manager and Junior Engineer in Executive and Non-Executive Category Recruitment 2019. Those Candidates Who have Appeared during this Recruitment can Download Result now.”UP Metro LMRC Various Post Result”

Uttar Pradesh Metro Rail Corporation Ltd. (Lucknow Metro)

LMRC Various Post Recruitment 2019

Avt. No. LMRC/HR/Rectt/P/18/2019

WWW.SARKARIJOBFIND.CC

Important Dates

  • Online Application Start : 22 November 2019
  • Registration Last Date : 31 December 2019
  • Fee Payment Last Date : 31 December 2019
  • Exam Date : 20-22 January 2020
  • Admit Card Available : 11 January 2020
  • Answer Key Available : 25 January 2020
  • Result/ Score Card Available : 16 May 2020

Application Fee

  • General, OBC, EWS : Rs. 590/-
  • SC, ST Candidates : Rs. 236/-

Payment Mode

  • Pay Exam Fee Through Credit Card, Debit Card, Net Banking Fee Mode.

Age Limit as on 01/12/2019

  • Min. Age : 21 Yrs.
  • Max. Age : 28 Yrs.
  • Read the Notification for Age Relaxation.

Candidates have Bachelor Degree an Any Stream from Recognized University.

Vacancy | Eligibility Details

Total Vacancy : 183 Post

Executive Category Vacancy

Post Code Post Name Total Eligibility
E01 Asst. Manager Civil 28
  • BE/ B.Tech Degree in Related Trade/ Engineering with 60% Marks.
E02 Asst. Manager Electrical 18
E03 Asst. Manager S&T 8
E04 Asst. Manager Accounts 6
  • CA/ ICWA Degree.
E05 Asst. Manager HR 2
  • MBA in HR/ PGDM HR with 60% Marks.
E06 Asst. Manager Public Relation 2
  • Master Degree in Mass Communication/Journalism with 60% Marks.

Non Executive Category Vacancy

Post Code Post Name Total Eligibility
NE01 Junior Engineer Civil 58
  • 3 Yrs. Diploma in Engineering in Related Trade with 60% Marks.
NE02 Junior Engineer Electrical 40
NE03 Junior Engineer S&T 17
NE04 Public Relation Asst. 4
  • Bachelor Degree in Mass Communication/Journalism.

Category Vacancy Details

Code Post Name Gen EWS OBC SC ST Female ESM Total
E01 Assistant Manager Civil 14 02 07 05 0 05 01 28
E02 Assistant Manager Electrical 10 01 04 03 0 03 0 18
E03 Assistant Manager S&T 05 0 02 01 0 01 0 08
E04 Assistant Manager Accounts 04 0 01 01 0 01 0 06
E05 Assistant Manager HR 02 0 0 0 0 0 0 02
E06 Assistant Manager Public Relation 02 0 0 0 0 0 0 02
NE01 Junior Engineer JE Civil 25 05 15 12 01 11 03 58
NE02 Junior Engineer JE Electrical 18 04 10 08 0 08 02 40
NE03 Junior Engineer JE S&T 09 01 04 03 0 03 0 17
NE04 Public Relation Assistant 03 0 01 0 0 0 0 04

UP Metro LMRCL Junior Engineer Exam Pattern 2020 

Name of the Subject Number Of Questions Time Duration
English 140 02 Hours (120 Minutes)
General Awareness & Computer Applications
Logical Ability
Quantitative Aptitude
Knowledge of the discipline
Total 140 120 minutes

There will be a complete of 140 questions which can carry equal marks.
There will be negative marking. For every wrong answer, 1/3 marks are going to be deducted.
The examination are going to be conducted through the web Computer Based Test (CBT) mode in various exam centres across

  • Lucknow
  • Kanpur
  • Agra
  • Allahabad
  • Varanasi
  • Gorakhpur
  • Meerut
  • Jhansi
  • Bareilly
  • Gautam Buddha Nagar(Noida)
  • Greater Noida
  • Ghaziabad
  • Aligarh
  • Moradabad
  • Muzaffarnagar

Marks Distribution for UP Metro Exam 2020:

  • General English: 10 Questions 
  • General Awareness: 15 Questions 
  • Logical Ability: 10 Questions 
  • Quantitative Aptitude: 15 Questions 
  • Knowledge of the Discipline/ trade (Electrical/S&T/Civil): 90 questions 

UP Metro LMRCL Selection Procedures:

The Officials of the Lucknow Metro Rail Corporation Limited are getting to fill the vacant positions by conducting the Written Examination, Personal Interview, Document Verification. Aspirants must know the LMRC Selection Procedures to recruit their desired jobs within the Lucknow Metro Rail Corporation Limited.

  • Written Examination
  • Interview
  • Document Verification

UP Metro LMRCL Syllabus 2020

UP Metro LMRCL General English Syllabus

  • Idioms and Phrases
  • Sentence Improvement
  • Synonyms
  • Sentence Arrangement
  • Substitution
  • Prepositions
  • Antonyms
  • Fill in the blanks
  • Passage Completion
  • Spotting Errors
  • Substitution
  • Sentence
  • Active and Passive Voice
  • Completion
  • Spelling Test
  • Error Correction (Underlined Part)
  • Transformation
  • Para Completion
  • Joining Sentences
  • Error Correction (Phrase in Bold)

LMRC JE Quantitative Aptitude Syllabus

  • Probability
  • Time and Distance
  • Quadratic Equations
  • Odd Man Out
  • Races and Games
  • Numbers and Ages
  • Averages
  • Mensuration
  • Profit & Loss
  • Problems on Numbers
  • Pipes and Cisterns
  • Indices and Surds
  • Simple Equations
  • Permutations and Combinations
  • Compound Interest
  • Boats and Streams
  • Simplification and Approximation
  • Mixtures and Allegations
  • Simple Interest
  • Problems on LCM and HCF
  • Time and Work Partnership
  • Problems on Trains
  • Ratio and Proportion
  • Areas
  • Volumes
  • Percentages

Logical Ability Syllabus For LMRC Exam

  • Current Affairs
  • Economy
  • Banking
  • Awards
  • Sports
  • Current Events
  • Logical Ability
  • Non-Verbal Series
  • Blood Relations
  • Mirror Images
  • International Affairs
  • Directions
  • Clocks & Calendars
  • Arithmetical Reasoning
  • Embedded Figures
  • Coding-Decoding
  • Analogy

UP Metro LMRC General Awareness Syllabus

  • Indian History
  • Indian Culture & Heritage
  • Current Events: National & International
  • Indian Polity
  • Indian Constitution
  • Science & Technology
  • Indian Geography
  • IT & Space etc
  • Indian Economy

LMRC JE Electrical Engineering Syllabus

Basic Electrical Engg. And Electt. Measurements : Concepts of currents, Voltage, Resistance, Power and energy, their units, Ohm’s law. Circuit Law: Kirchhoff’s law Solution of simple network problems, Network theorems and their applications, Electro-magnetism concept of flux, Emf, Reluctance, Magnetic circuits, Electro-magnetic induction, Self and mutual inductance.,A.C. fundamentals Instantaneous, Peak, R.m.s. And average values of alternating waves, Equation of sinusoidal wave form, Simple series and parallel a.c. Circuits consisting of R.L. and C. Resonance, Measurement and measuring instruments Moving coil and moving iron ammeters and voltmeters, Extension of range, Watt meters, Multimeters, Megger, Basic Electronics.

Electrical machines : Basic principles D, C motors of generators, their characteristics, Speed control and starting of D.C. motors, Losses and efficiency of D.C. machines.

1-phase and 3-phase Transformers : Principles of Operation, Equivalent Circuit, Voltage Regulation O.C. And S.C. Tests, Efficiency, Auto Transformers, Synchronous Machines, Generation Of Three Phase Emf, Armature Reaction, Voltage Regulation, Parallel Operation Of Two Alternators, Synchronizing, Staring And Applications Of Synchronous Motors, 3-Phase Induction Motor, Rotating Magnetic Field, Principle Of Operation, Equivalent Circuit, Torque Speed Characteristics, Starting And Speed Control Of 3-Phase Induction Motors, Fractional Kw Motors, 1-Phase Induction Motors A.C. Series Motor, Reluctance Motor.

General, Transmission, and Distribution:

Different types of power stations, Load factor, Diversity factor, Demand factor, Simple problems thereon, Cost of generation inter connection of power stations, Power factor improvement, Various types of tariffs, Types of faults Short circuit current for symmetrical faults, Switchgears-rating of circuit breakers: Principles of a are extinction by oil and air, H.R.C. fuses, Protection earthier leakage, Over current Buchhotgz relayMerz-Prince system of protection of generators & transformers, Protection of feeders and bus bars., Lightning arresters, Various transmission and distribution systems, Comparison of conductor materials. Efficiency for different systems.

Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drivers and motors.

BASIC ELECTRICAL ENGINEERING
Basic concepts and principles of D.C and A.C fundamental, A C circuits, batteries, electromagnetic induction etc. including constant voltage and current sources.

ANALOG ELECTRONICS


Fundamental concepts of basic electronics and basic understanding of conductors, semiconductors and insulators, extrinsic and intrinsic semi-conductors, p-n junction, need of rectifiers in electronics, understanding of filters in rectifiers, tunnel diodes, LEDs, varactor diodes, LCD; working of transistors in various configurations; Concept of FETs and MOSFET etc.UP Metro LMRC Various Post Result

CONTROL SYSTEMS


Basic elements of control system, open loop control system, closed loop control system, control system terminology, manually controlled closed loop systems, automatic controlled closed loop systems, basic elements of a servo mechanism, Examples of automatic control systems, use of equivalent systems for system analysis, linear systems, non-linear systems, control system examples from chemical systems, mechanical systems, electrical systems, introduction to Laplace transform. Transfer function analysis of ac and dc servomotors synchros, stepper motor, amply dyne. ac position control system, magnetic amplifier.

Control system representation: Transfer function, block diagram, reduction of block diagram, problems on block diagram, Mason’s formula signal flow graph

Non-Linear Control System : Introduction, behaviour of non-linear control system. Different types of nonlinearities, saturation, backlash, hysteris, dead zone, relay, fiction, characteristics of non-linear control system, limit cycles, jump resonance, jump phenomenon. Difference between linear and non-linear control system.

ELECTRONIC COMPONENTS AND MATERIALS


Materials : Classification of materials , Conducting, semi-conducting and insulating materials through a brief reference to their atomic structure.

Conducting Materials : Resistors and factors affecting resistivity such as temperature, alloying and mechanical
stressing. Classification of conducting materials into low resistivity and high resistivity materials.

Insulating Materials : Important relevant characteristics (electrical, mechanical and thermal) and applications of the following material: Mica, Glass, Copper, Sliver, PVC, Silicon, Rubber, Bakelite, Cotton, Ceramic, Polyester, Polythene and Varnish.
Magnetic Materials : Different Magnetic materials; (Dia, Para, Ferro) and their properties. Ferro magnetism,
Domains, permeability, Hysteresis loop. Soft and hard magnetic materials, their examples and typical applications.

MEASURING INSTRUMENTS
Introduction to Testing and Measurements, Measurement of Resistance, Inductance and Capacitance, Ammeter, Voltmeter and Multimeter, Power and Energy Measurements, Frequency and Phase difference Measurement.
PRINCIPLES OF INSTRUMENTATION
Basic building blocks of any instrumentation systems, Performance characteristics of Oscillator Instruments, Instrument selection: Factors affecting instrument selection, accuracy, precision, linearity, resolution, sensitivity, hysteresis, reliability, serviceability, loading effect, range advantage and limitation, cost effectiveness and availability – Static and dynamic response – Environmental effects – Calibration tools
FUNDAMENTALS OF DIGITAL ELECTRONICS
Concepts of Digital electronics, Number system, gates, codes, arithmetic logic circuits, flip-flops, shift resistors and counters.UP Metro LMRC Various Post Result score card

LMRC Junior Engineer Civil Syllabus 2020

Building Materials : Physical and Chemical properties, Classification, Standard tests, Uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), Asbestos products, Timber and Wood based Products, laminates, bituminous materials, paints, varnishes.

Surveying : Principles of surveying, working of prismatic compass and bearings, Plane table surveying, Theodolite traverse, Adjustment of theodolite, Levelling and contouring, Curvature, Refraction correction, Permanent adjustment of dumpy level, Methods of contouring and uses of a contour map, Tachometric survey.

Soil Mechanics: Origin of soil phase diagram, Definitions, Of void ratio porosity, Degree of saturation, Water content specific gravity of soil grains and unit weights, Grain size distribution curves for different solid and their uses, Atterjerg’s limits isi soil classification, Plasticity chart, Coefficient of permeability, Effective stress, Consolidation of soils.

Soil: Calculation shear strength of soils, direct shear test, Vane shear test, Triaxial test, Soil compaction, Lab compaction test, Moisture content, and bearing capacity of soils, Plate load test, and Standard penetration test.

Hydraulics: Fluid properties, Hydrostatics, Measurements of flow, Bernoulli’s theorem and its application, Floor through pipes, Flow in open channels, Weirs, Flumes, Spillways, Pumps and turbines.

Environmental Engineering: Quality of water, Source of water supply, purification of water, Distribution of water, Need of sanitation, Sewerage systems, Circular sewers, Oval sewer, Sewer appurtenances, Surface water drainage sewage treatments.

LMRC Junior Engineer S&T Syllabus 2020

BASIC ELECTRICAL ENGINEERING
Basic concepts and principles of D.C and A.C fundamental, A C circuits, batteries, electromagnetic induction etc. including constant voltage and current sources.

ANALOG ELECTRONICS
Fundamental concepts of basic electronics and basic understanding of conductors, semiconductors and insulators, extrinsic and intrinsic semi-conductors, p-n junction, need of rectifiers in electronics, understanding of filters in rectifiers, tunnel diodes, LEDs, varactor diodes, LCD; working of transistors in various configurations; Concept of FETs and MOSFET etc.

CONTROL SYSTEMS


Basic elements of control system, open loop control system, closed loop control system, control system terminology, manually controlled closed loop systems, automatic controlled closed loop systems, basic elements of a servo mechanism, Examples of automatic control systems, use of equivalent systems for system analysis, linear systems, non-linear systems, control system examples from chemical systems, mechanical systems, electrical systems, introduction to Laplace transform. Transfer function analysis of ac and dc servomotors synchros, stepper motor, amply dyne. ac position control system, magnetic amplifier.

Control system representation: Transfer function, block diagram, reduction of block diagram, problems on block diagram, Mason’s formula signal flow graph
Time Response Analysis : Standard test signals, time response of first and second-order system, time constant, time response of second order system, time response specifications, steady-state errors and error constants, problems in first and second order system.
Stability: Routh Hurwitz Criterion, Root Locus, Bode Plotting using semi log graph paper Introduction to multiloop control system and its types, feedforward, cascade, ratio, split range, control system. Study of different processes using above mentioned control systems
Non-Linear Control System : Introduction, behaviour of non-linear control system. Different types of nonlinearities, saturation, backlash, hysteris, dead zone, relay, fiction, characteristics of non-linear control system, limit cycles, jump resonance, jump phenomenon. Difference between linear and non-linear control system.

ELECTRONIC COMPONENTS AND MATERIALS


Materials : Classification of materials , Conducting, semi-conducting and insulating materials through a brief reference to their atomic structure.

Conducting Materials : Resistors and factors affecting resistivity such as temperature, alloying and mechanical stressing. Classification of conducting materials into low resistivity and high resistivity materials.

Insulating Materials : Important relevant characteristics (electrical, mechanical and thermal) and applications of the following material: Mica, Glass, Copper, Sliver, PVC, Silicon, Rubber, Bakelite, Cotton, Ceramic, Polyester, Polythene and Varnish.”UP Metro LMRC Various Post Result”

Magnetic Materials : Different Magnetic materials; (Dia, Para, Ferro) and their properties. Ferro magnetism, Domains, permeability, Hysteresis loop. Soft and hard magnetic materials, their examples and typical applications.

MEASURING INSTRUMENTS : Introduction to Testing and Measurements, Measurement of Resistance, Inductance and Capacitance, Ammeter, Voltmeter and Multimeter, Power and Energy Measurements, Frequency and Phase difference Measurement
PRINCIPLES OF INSTRUMENTATION : Basic building blocks of any instrumentation systems, Performance characteristics of Oscillator Instruments, Instrument selection: Factors affecting instrument selection, accuracy, precision, linearity, resolution, sensitivity, hysteresis, reliability, serviceability, loading effect, range advantage and limitation, cost effectiveness and availability – Static and dynamic response – Environmental effects – Calibration tools.

FUNDAMENTALS OF DIGITAL ELECTRONICS


Concepts of Digital electronics, Number system , gates, codes, arithmetic logic circuits, flip-flops, shift resistors and counters.”UP Metro LMRC Various Post Result”

BASIC OF Microprocessors
Architecture of a typical microprocessor, configurations and instructional pair configuration systems and working of various peripheral interface chips. 8085 Microprocessors, architecture, instruction sets and introduction to 8086.
POWER ELECTRONICS
Introduction to thyristors and other power Electronics devices, Controlled Converters, Inverters, Choppers.

COMPUTER-AIDED INSTRUMENTATION


Computer aided Instrumentation, Buses and Standards : Introduction , BUS types : The I/O BUS a) ISA bus b) EISA
Bus c) PCI bus , GPIB 2.5 RS-232, Linear Circuits and Signal Conditioning, Parallel Port (PP) Interfacing Techniques, Serial Port (SP) Interfacing Techniques, USB Port Interfacing Techniques

QUALITY AND RELIABILITY TECHNIQUES
Quality organization and Management: Introduction, Quality Policy, Task for Quality and Introduction to Total  Systems.UP Metro LMRC Various Post Result
costs: Prevention costs, appraisal costs, internal failure costs, external failure costs, the impact of quality costs
on profitability.

IMPORTANT LINKS

Download Result/ Score Card Click Here
Download Answer Key Click Here
Download Admit Card Click Here
Candidates Login Click Here
Date Extended Notice Click Here
Download Notification Click Here
Official Website Click Here
UP Metro LMRC Various Post Result
UP Metro LMRC Various Post Result

Other Latest Post

1.

 

2.

 

3.

 
Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

close